Overview
The Sepco SDE2C5P5JCAC-12D4 pump packing is a compression packing assembly engineered for dependable sealing in industrial pump systems. SEPCO manufactures pump and valve packing, mechanical seals, gasket materials, high-performance thermoplastics, air seals, and bearing isolators. This packing assembly is sized at 2.375″ × 3.00″ × 0.313″ and is compatible with SS452 and SS557 pump heads and DFR-PM3 mounting configurations, making it an ideal replacement for scheduled maintenance or emergency repairs.
Key Features
- Compression packing design for controlled sealing and durability
- Sized to fit 2.375″ shaft diameter applications
- Compatible with SS452 and SS557 pump head configurations
- Engineered for both hydraulic and industrial centrifugal pump systems
- DFR-PM3 head assembly compatibility
- Reduces leakage and extends pump life with proper installation
Technical Specifications
Compression packing is a widely used seal technology that employs a gland to tighten the top packing ring, compressing it onto the stuffing box. These packings are inserted as cut rings between the rotating member and the pump casing.
- Outer Diameter: 3.00 inches
- Inner Diameter: 2.375 inches
- Thickness: 0.313 inches
- Type: Compression packing rings
- Head Assembly: DFR-PM3
- Compatible Pump Heads: SS452, SS557
- Packing Style: Ring configuration
Typical Applications
Common packing applications include pump packing, valve packing, and packing for other rotating, reciprocating, and static equipment for the process industries and manufacturers. The SDE2C5P5JCAC-12D4 is suitable for:
- Centrifugal pump maintenance and repair
- Hydraulic pump sealing
- Industrial fluid transfer systems
- Scheduled pump packing replacement
- Systems requiring reliable leak control
Compatibility & Replacements
Compatible With
- Pumps with SS452 pump head configuration
- Pumps with SS557 pump head configuration
- DFR-PM3 pump head assemblies
- 2.375″ shaft diameter pump systems
- Standard compression packing gland assemblies
Replaces / Drop-In Replacement For
Verify compatibility with your system integrator before ordering. When replacing packing, ensure exact dimensional match to existing installation (2.375″ × 3.00″ × 0.313″ profile).
Works With
- Standard pump stuffing box assemblies
- Compression packing gland systems
- Industrial pump maintenance procedures
- Hydraulic and pneumatic pump systems
