Overview
Applicator Systems hot melt adhesive hose assembly is an electrically-heated, insulated delivery system designed for industrial adhesive application. Applicator Systems has established itself as a prime source for high quality heated hoses that are compatible with most hot melt systems on the market, and these hoses are used in a broad range of applications, from end-of-line packaging to product assembly. The insulated line prevents heat loss during adhesive transfer and ensures consistent application temperatures throughout the hose run.
Key Features
- Electrically-heated construction — designed for the transfer of hot-melt material from an adhesive supply unit to an applicator head or handgun
- Insulated line design — hoses must be sufficiently insulated and have appropriate thickness and diameter to facilitate the glue’s pressure and flow
- Temperature regulation — hose temperature is regulated by the ASU’s controller, with a sensor located in the hose providing temperature information
- Made in the USA — Applicator Systems has established a reputation for quality hot melt hoses
- Broad system compatibility — works with most standard hot melt supply units and applicator configurations
Technical Specifications
Standard industrial hot melt hose assemblies typically operate under the following parameters:
- Hose type: Electrically heated, insulated delivery line
- Operating pressure: Design rated for standard adhesive supply unit pressures
- Temperature range: Regulated by supply unit controller
- Insulation: High-temperature silicone-based wrap
- Construction: Flexible tubing with integrated heating elements
- Standard lengths: 8, 12, 16, and 20 feet available
Typical Applications
Hot melt systems are typically used in industrial applications where large quantities of adhesives are needed for production or packaging. Common uses include:
- End-of-line carton sealing and case closure
- Product assembly and component bonding
- Mattress and bedding assembly
- Electronic device assembly and component attachment
- Non-woven fabric bonding (diapers, carpeting)
- Bookbinding and page attachment
Compatibility & Replacements
Compatible With
- Standard hot melt adhesive supply units (ASUs)
- Most manual and automatic adhesive applicators
- Handheld applicator guns and spray nozzles
- Industrial packaging and assembly lines
- Temperature controllers with hose sensor inputs
Replaces / Drop-In Replacement For
Verify compatibility with your system integrator before ordering. This assembly may replace standard Applicator Systems hose units in equivalent configurations when using same diameter and connector types.
Works With
- Hot melt adhesive supply units (all major brands)
- Pattern controllers and flow regulators
- Temperature sensing and control systems
- Pneumatic and electric actuated applicators
- Industrial process automation equipment
