Overview
The Noritake Itron CU20029-UW1J is a 20×2 character VFD (vacuum fluorescent display) module designed for industrial automation, control systems, and embedded applications. This CU20029-UW1J module combines a high-contrast green-blue display with a built-in controller and parallel interface, making it a reliable solution for real-time parameter display in factory floors, process control equipment, and test instrumentation.
Key Features
- 20×2 alphanumeric character display with 5×7 dot matrix and international ANK format
- Green (blue-green) vacuum fluorescent illumination with 350 cd/m² minimum luminance for visibility in bright conditions
- Small 9.2mm character size (3.8mm × 9.2mm) for compact panel integration
- Built-in controller with parallel interface (DB0–DB7 data lines, control signals)
- 5V single supply operation (4.75V to 5.25V range)
- Low 400 mA maximum current consumption
- Wide operating temperature range: −40°C to +85°C
- 20-pin DIP connector for easy integration
- RoHS compliant
Technical Specifications
The CU20029-UW1J offers robust performance across a range of industrial environments:
- Character Count: 20 × 2 (40 characters total)
- Character Matrix: 5 × 7 dot pattern, ANK and international format support
- Resolution: 100 × 14 pixels
- Character Size: 3.8mm (X) × 9.2mm (Y)
- Dot Size: 0.6mm × 0.97mm
- Display Area: 102.6mm × 18.8mm
- Interface: Parallel (8-bit data bus with control lines)
- Supply Voltage: 4.75V to 5.25V DC
- Supply Current: 400 mA maximum
- Color: Green (blue-green) luminescence
- Luminance: 350 cd/m² minimum
- Operating Temperature: −40°C to +85°C
- Storage Temperature: Compatible with extended temperature environments
- Pin Count: 20-pin DIP
- Compliance: RoHS
Typical Applications
The CU20029-UW1J is widely used in:
- Industrial control panels and operator interfaces
- Machine tool displays and instrumentation
- Process monitoring and data logging equipment
- Temperature, pressure, and flow rate displays
- Legacy PLC and embedded system HMI applications
- Measurement and test equipment where compact, low-power display is needed
Compatibility & Replacements
Compatible With
- Parallel interface systems requiring 5V logic signals
- Industrial microcontroller and embedded systems platforms
- Legacy PLC systems with parallel GPIO output capability
- Test and measurement equipment with 8-bit parallel data busses
Replaces / Drop-In Replacement For
Verify compatibility with your system integrator before ordering. Consult Noritake’s compatibility matrix or contact technical support for equivalent part numbers.
Works With
- Parallel interface protocols (8-bit data + control lines)
- 5V digital logic systems and microcontrollers
- Standard embedded C/C++ firmware for VFD character command sets
- Industrial control software with GPIO or parallel port drivers
