Overview
The Nordson 276740G heated hose is a water-wash heated hot melt adhesive delivery hose engineered for reliable performance in industrial adhesive dispensing systems. Rated at 240V with 109W heating element output, this 4-foot hose maintains consistent adhesive temperature while handling pressures up to 1500 PSI. Water-wash construction enables easy cleaning and is ideal for food, beverage, and dairy processing environments where frequent washdowns are required.
Key Features
- 4-foot length with 5/16-inch internal diameter for optimal adhesive flow
- 240V power supply with 109W wattage rating for reliable thermal consistency
- Water-wash outer jacket resists moisture penetration while maintaining thermal efficiency
- Maximum operating pressure of 1500 PSI for high-performance dispensing applications
- Multi-layer construction with aramid insulation and stainless-steel reinforcement
- Compatible with RTD (Resistance Temperature Detector) temperature control systems
Technical Specifications
- Pressure Rating: 1500 PSI maximum
- Length: 4 feet (1.2 meters)
- Internal Diameter: 5/16 inch (7.9 mm)
- Voltage: 240V
- Wattage: 109W
- Hose Type: Water-Wash Heated
- Insulation: Aramid
- Reinforcement: Stainless Steel Braid
- Temperature Control: RTD compatible
- Connector: 6-pin round plug configuration
Typical Applications
The Nordson 276740G is widely used in food and beverage packaging, pharmaceutical manufacturing, and dairy processing where adhesive application requires frequent cleaning and sanitization. Its water-resistant outer jacket and maintained thermal consistency make it suitable for:
- Carton and case sealing in food packaging lines
- Label application in beverage bottling
- Product assembly in dairy and pharmaceutical manufacturing
- Any high-volume hot melt dispensing operation requiring washdown capability
Compatibility & Replacements
Compatible With
- Nordson ProBlue 2300 series melters
- Nordson ProBlue 3000 series melters
- Nordson DuraBlue automatic and handgun applicators
- Nordson ProBlue 2000, IV, and V series systems
- RTD-style water-wash hand-held applicators
- Automatic adhesive applicators with RTD temperature control
Replaces / Drop-In Replacement For
The Nordson 276740G serves as a direct replacement for original OEM hot melt hoses in Nordson ProBlue and DuraBlue series systems. Third-party compatible replacements include equivalent water-wash hoses from aftermarket manufacturers such as Astro Packaging and Hot Melt Supply Co., though OEM part verification is recommended before ordering alternative brands.
Works With
- Nordson ProBlue melting and temperature management systems
- RTD temperature sensing and control protocols
- Water-wash applicator compatible systems
- Standard 6-pin round connector plug configurations
