Overview
The Baldor VENM3538 (35E010M303G3) is a general-purpose AC induction motor built for industrial and commercial drive applications. This 0.5 HP motor operates at 1765 RPM with dual voltage capability (230/460 VAC), three-phase, 60 Hz operation, and is housed in a TENV (Totally Enclosed Non-Ventilated) 56C steel frame. As part of Baldor’s SuperE motor line, it meets NEMA Premium efficiency standards and is inverter-ready with wide variable torque speed ranges.
Key Features
- NEMA Premium Efficiency: SuperE Motors provide NEMA Premium efficiency and are designed as standard to be inverter ready
- Dual Voltage Operation: 230.0 V and 460.0 V @ 60 Hz with automatic voltage selection
- Ball Bearing Construction: Ball bearings with locked drive end bearing for reliable mounting in any orientation
- C-Face/Footless Mounting: Flexible installation options for horizontal or vertical applications
- Reversible Rotation: Reversible Rotation capability for bidirectional drive requirements
- Heavy-Gauge Steel Frame: Heavy gauge steel frame for durability in industrial environments
Technical Specifications
- Horsepower: 0.5 HP @ 60 HZ
- Speed: 1770 RPM (Full Load), 1800 RPM Synchronous @ 60 HZ
- Voltage: 230.0 V / 460.0 V @ 60 HZ
- Phase: 3 Phase
- Full Load Current: 1.800 A @ 230.0 V, 0.900 A @ 460.0 V
- Frame: 56C
- Frame Material: Steel
- Enclosure: TENV
- Efficiency @ 100% Load: 78.2%
- Service Factor: 1.15
- Shaft Diameter: 5/8 in
- Full Load Torque: 8.65 ft-lb
- Bearing Type: Ball Bearings with Polyrex EM grease (-20F +300F)
- Temperature Rise @ Rated Load: 58° C @ S.F.
- Ambient Temperature Rating: 40 °C
- Design Code: B
- Duty Rating: Continuous
- Agency Approvals: CSA UR
Typical Applications
Typical applications include pumps, fans, conveyors, machine tools, and gear reducers. The TENV enclosure protects against dripping water and dust, making it suitable for light wash-down environments. Inverter-ready design with wide variable torque speed ranges enables retrofit into VFD-controlled systems without derating.
Compatibility & Replacements
Compatible With
- VFD and variable frequency drive systems (NEMA MG1 Part 31.4.4.2 compliant)
- Soft starters and reduced-voltage starters
- Industrial control systems operating at 230/460V three-phase, 60 Hz
- Pump, fan, and blower control applications
- Gear reducer and gearmotor installations
Replaces / Drop-In Replacement For
Baldor VENM3538 (35E010M303G3) direct replacement applications. Verify mounting footprint and electrical terminals with original equipment drawings before ordering for legacy replacement applications.
Works With
- Standard three-phase 230/460V industrial power distribution
- Manual and automatic voltage selector panels
- EtherNet/IP, PROFINET, and Modbus TCP industrial protocols via compatible drive systems
- Baldor’s control and monitoring ecosystem
