Overview
The Consolidated 6020-2RSNR is a sealed deep groove ball bearing with snap ring, engineered for reliable operation in demanding industrial environments. This bearing features a 100 mm bore diameter, 150 mm outside diameter, and 24 mm width, making it suitable for machinery requiring high-speed radial and axial load capacity. The seal designation indicates double contact rubber seals on both sides with an integral snap ring for secure mounting, pre-lubricated with specially formulated grease for extended service life.
Key Features
- Sealed Design with Snap Ring: Pre-lubricated with specially formulated grease and sealed with contact seals, protecting the bearing and lubricant from contaminants that could cause premature failure, reducing maintenance frequency and extending bearing life
- Deep Groove Geometry: Single-row ball bearing with deep groove geometry for applications requiring high speeds and supporting both radial and axial loads
- Chrome Steel Construction: Made of chrome steel and double sealed for durability and load-carrying capability
- Steel Cage: Steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise
Technical Specifications
- Bore Diameter: 100 mm
- Outside Diameter: 150 mm
- Width: 24 mm
- Bearing Type: Deep Groove Ball Bearing
- Seal Type: Contact Seals (2RS)
- Snap Ring: Yes (NR suffix)
- Cage Material: Steel
- Lubrication: Pre-lubricated with grease
- Static Load Rating: 54,000 N
- Dynamic Load Rating: 600,500 N
- Maximum Speed (Grease): 3,060 rpm
- Material Grade: Chrome Steel
Typical Applications
The Consolidated 6020-2RSNR is widely used in:
- Electric motors and generators
- Industrial gearboxes and power transmission equipment
- Pump and compressor shafts
- Machine tool spindles
- Conveyor systems and rolling mills
- Agricultural machinery
- Automotive and industrial drive systems
Compatibility & Replacements
Compatible With
- Industrial machinery requiring 100 mm bore deep groove ball bearings
- Equipment designed for standard metric bearing sizes per ISO 286 specifications
- Shaft applications with snap ring mounting grooves
- High-speed radial and combined load applications
Replaces / Drop-In Replacement For
- Standard 6020-2RS variants when snap ring mounting is required
- Verify compatibility with your system integrator before ordering, as internal clearance specifications (C/2, C/3) may affect fitment
Works With
- Standard metric shaft diameters and housing bores per ISO specifications
- Sealed bearing applications requiring no additional lubrication in normal service
- Industrial equipment maintenance and replacement programs
