Overview
The Dodge P2B-SC-107 (part number 123813) is a two-bolt pillow block ball bearing unit designed for standard industrial duty applications. With a shaft size of 1-7/16 in. and SC Normal Duty classification in the 207 Series, this bearing delivers reliable performance in conveyor systems, mechanical drives, and similar equipment. The unit features a screw locking device, single lip seal, non-expansion fixed bearing type, and delivers 5759 lb dynamic and 3461 lb static load ratings with a maximum operating speed of 5500 rpm.
Key Features
- 65-degree set screw angle engineered for maximum grip onto the shaft
- DualGuard seals with flingers for enhanced protection
- Operating temperature range from 225 to 400 degrees Fahrenheit
- Non-expansion fixed bearing type with single lip seal and two-bolt base mount
- Relubricatable design for extended service life
- Proven in air handling, food and beverage, chemical, oil and gas, pharmaceutical, and paper industries; widely used in conveyors and mechanical drives
Technical Specifications
- Shaft bore diameter: 1-7/16 in. (1.4375″)
- Dynamic load rating: 5759 lb; Static load rating: 3461 lb
- Maximum speed: 5500 rpm
- Overall dimensions: 6-1/2 in. length × 1-11/16 in. width × 3-3/4 in. height
- Bolt center-to-center: 4.68 to 5.44 in.; Base to bore centerline: 1.88 in.
- Operating temperature: 225 to 400°F
- Locking device: Set screw; Housing material: Cast iron, powder coated
- Bearing series: 207 Normal Duty
Typical Applications
Dodge SC/SCM/SL bearings are used in air handling, food and beverage, chemical, oil and gas, pharmaceutical, paper and forest, and baggage handling industries. Common applications include conveyors, mechanical drives, and extreme duty environments. The P2B-SC-107 is ideal for equipment requiring standard duty performance with straightforward set screw installation and maintenance.
Compatibility & Replacements
Compatible With
- Standard industrial shafts 1-7/16 inches in diameter
- Two-bolt mounting bases and pillow block housings
- General-purpose mechanical power transmission systems
- Conveyor drive systems
- Fan and pump applications
Replaces / Drop-In Replacement For
Dodge pillow block bearing units with identical 207 series specifications and 1-7/16 in bore diameter. The manufacturer part number 123813 is the primary identifier for this exact unit. Verify compatibility with your system integrator before ordering alternative bearing models.
Works With
- Two-bolt base mounting arrangements
- Standard set screw locking mechanisms (65-degree angle)
- General industrial lubrication schedules and grease types
- Cast iron pillow block housing designs
- Industrial machinery requiring 207 series ball bearing inserts
