Overview
This bulk lot contains 200 fixed resistors, each rated at 0.5W and 36k Ohms. These unbranded resistors provide a cost-effective solution for electronics technicians, repair shops, and circuit designers who need reliable standard resistance values on hand. A 36k Ohm resistor rating falls within industry-standard E12 and E24 resistor series, making these components highly compatible with legacy and modern circuit designs.
Key Features
- Resistance: 36,000 Ohms (36k Ω)
- Power rating: 0.5W (1/2-watt)
- Quantity: 200 resistors per lot
- Standard fixed resistor construction—ideal for current limiting, voltage dividing, and biasing applications
- Bulk quantity minimizes per-unit cost for high-volume assembly and stockpiling
Technical Specifications
0.5W resistors typically measure approximately 3.2mm in diameter (physical size depends on construction type). The 36k Ohm rating is a standard value available across multiple resistor series including metal film, carbon film, and wirewound designs. Maximum operating voltage and temperature coefficient vary by manufacturing type but are suitable for general-purpose low-voltage and signal-level circuits.
Typical Applications
- Analog audio circuits and amplifier biasing
- Power supply voltage dividers and feedback networks
- Sensor signal conditioning and pre-amplification
- LED current-limiting networks in low-power indicator circuits
- General-purpose circuit repair and component replacement in vintage and modern electronics
Compatibility & Replacements
Compatible With
- Breadboard and stripboard prototyping circuits
- PCB soldering and wave-soldering assembly processes
- Low-voltage analog and digital signal circuits (up to typical working voltage ratings)
- Through-hole (THT) mounting on standard 0.1-inch pitch PCB layouts
Replaces / Drop-In Replacement For
Any 0.5W 36k Ohm fixed resistor. Common manufacturer equivalents include standard carbon-film and metal-film 36kΩ resistors from suppliers such as Yageo, Panasonic, and other generic bulk resistor manufacturers. Verify specifications with your circuit schematic before installation.
Works With
- Analog circuit design platforms (SPICE simulation for circuit analysis and validation)
- PCB design software (KiCad, Altium Designer, Eagle) for component footprint libraries
- Test equipment including multimeters and LCR meters for resistance verification
- Standard soldering irons and reflow solder processes for assembly
