Overview
The ifm Efector IF5763 inductive proximity sensor (part number IFA2002-FRKG/US-100-IRF) is designed for industrial automation applications requiring dependable, contactless object detection. With a 2mm sensing range, threaded M12 x 1 housing, and wide operating voltage support (10–55V DC), this sensor provides robust performance in automated production lines, material handling, and position-detection systems.
Key Features
- 2mm switching distance for precise object detection
- Operating voltage: 10–55V DC with integrated reverse polarity protection
- PNP/NPN output configuration, selectable for normally open or normally closed operation
- Threaded M12 x 1 connector design for secure mounting
- Low residual current (0.5mA max) reduces power consumption
- Switching frequency up to 1100 Hz for high-speed applications
Technical Specifications
- Maximum voltage drop: 4.6V
- Minimum load current: 4mA
- Protection class: II
- Actual switching distance tolerance: ±10%
- Short circuit protection: Yes
- Housing material: Threaded design (M12 x 1)
Typical Applications
Inductive proximity sensors like the ifm Efector IF5763 are widely used for:
- Position and limit detection in linear actuators and cylinders
- Parts presence verification on conveyor systems
- Speed and proximity monitoring in packaging machinery
- Material sorting and orientation control
- Automated assembly and quality-control checkpoints
Compatibility & Replacements
Compatible With
- Allen-Bradley CompactLogix and ControlLogix PLCs (via standard 24V/10-55V DC I/O modules)
- Siemens S7-1200, S7-1500, and S7-300 automation systems
- Rockwell and third-party industrial controllers with 10–55V DC sensor inputs
- EtherNet/IP and Profibus fieldbus networks (via gateway/interface devices)
- Standard industrial relay and control circuits rated for inductive loads
Replaces / Drop-In Replacement For
- ifm IF5598 (equivalent full model designation)
- Earlier ifm inductive sensor models with comparable 2mm range and M12 threading
- Verify exact compatibility with your system integrator before substitution
Works With
- Studio 5000 and RSLinx for Allen-Bradley systems
- TIA Portal (Siemens automation engineering)
- Any 10–55V DC PLC input module or discrete I/O terminal
- Hardwired relay control circuits and safety interlocks
