Overview
The MAGPOWR GTSB550 load cell is a precision tension sensor rated for 550 lb (2446 N) capacity, designed for mounting under standard metric or inch pillow block bearings. The GTS units are designed to be mounted under standard metric or inch pillow block bearings, measuring the load created by the web and acting on the sensing roll. This configuration makes it ideal for web handling, converting machinery, and other applications requiring accurate continuous tension monitoring.
Key Features
- Full Wheatstone bridge incorporated into each GTS Load Cell for maximum accuracy and stability
- Flexible cable connector eliminates the need for left and right models, as each GTS Load Cell can be mounted on either side of the machine
- All sizes are adaptable and pre-drilled and tapped to accept standard metric and inch pillow block bearings
- Low deflection at full load rating (0.009 in.) for minimal mechanical interference
- Proven reliability for continuous industrial operation
Technical Specifications
- Capacity: 550 lb (2446 N)
- Gage Resistance: 350 ohm
- Gage Type: Metal foil, full bridge
- Excitation Voltage: 10 VDC nominal
- Output Signal: 21 mVDC nominal at full load rating
- Operating Temperature: -30ºC to 80ºC
- Combined non-linearity and hysteresis: 0.5% of full scale maximum
- Repeatability: 0.2% of full scale maximum
- Deflection at full load: 0.23 mm [0.009 in.]
- Connector: M12 4-pin
- Mounting: Two 7/16-14 threads, max bolt depth 1.0 inch, 6.25 inch spacing
Typical Applications
The GTSB550 is widely used in:
- Web tension control in converting and packaging machinery
- Paper, film, and fabric production equipment
- Roll-fed automation systems requiring precise load measurement
- Material handling systems with continuous tension monitoring
- Industrial motion control applications
Compatibility & Replacements
Compatible With
- MAGPOWR Cygnus and other tension controllers
- Standard pillow block bearing housings (metric and inch)
- Industrial automation control systems accepting 21 mVDC load cell signals
- Web handling machinery requiring 550 lb capacity sensors
Replaces / Drop-In Replacement For
- MAGPOWR GTSB550-EC12 (equivalent part with M12 connector)
- Other MAGPOWR Size B load cells in similar applications
Works With
- MAGPOWR tension control systems and controllers
- Maxcess web handling automation platforms
- Industrial PLC and motion control systems via 4-20 mA or direct mV signal
