Overview
The Flo-Dri G60A3-1E is a Thermon Cata-Dyne compressed gas scrubbing system engineered for natural gas well gas conditioning at the point of use. This three-cartridge unit removes H2S, moisture, hydrocarbons, aerosols, and particulate solids down to 0.5 micron, preventing equipment failure and costly downtime in instruments and catalytic heaters.
Key Features
- 250 PSIG working pressure rating with three-cartridge configuration
- Removes contaminants down to 0.5-micron particle size
- Accommodates flow rates up to 150 SCFM
- Cartridge media options: activated carbon, activated aluminum, and molecular sieve
- Low maintenance design with quick cartridge change-out
- Low pressure drop and minimal operational cost
- Suitable for 1–150 SCFM flow applications
Technical Specifications
- Model: G60A3-1E (FLO-DRI-G60A)
- Pressure Rating: 250 PSIG
- Number of Cartridges: 3
- Overall Length: 18.25 inches (464 mm)
- Overall Diameter: 6.25 inches (159 mm)
- Port-to-Port Distance: 12.38 inches (314 mm)
- Pipe Size: 1″ NPT
- Bed Capacity: 84.47 cubic inches
- Filtration Capability: 0.5 micron
- Flow Range: 1–150 SCFM
- Cartridge Types: Multiple media options available
- Operating Temperature: Contact manufacturer for range
- Manufacturer: Thermon
- Brand: Cata-Dyne
Typical Applications
The Flo-Dri G60A3-1E is ideal for:
- Natural gas well fuel gas conditioning at point of use
- Protection of gas-fired instruments requiring ultra-clean fuel
- Catalytic heater inlet filtration and drying
- Pipeline gas measurement stations
- Pressure control and gas regulation systems
- Applications requiring H2S, moisture, and aerosol removal
Compatibility & Replacements
Compatible With
- Standard 1″ NPT threaded connections
- Natural gas well gas supplies (1–150 SCFM)
- Gas measurement and pressure control equipment
- Catalytic heater systems
- Industrial gas conditioning applications
- Systems requiring 250 PSIG or lower working pressure
Replaces / Drop-In Replacement For
The Flo-Dri G60A3-1E is the three-cartridge variant of the FLO-DRI-G60A series. Verify compatibility with your system integrator before ordering to ensure proper fit and cartridge media selection.
Works With
- Activated carbon cartridges (FLO-DRI-60AC)
- Activated aluminum cartridges (FLO-DRI-60AA)
- Molecular sieve cartridges (FLO-DRI-60MS)
- Standard NPT-threaded pipe and fittings
- Thermon Cata-Dyne heating and instrumentation systems
