Overview
The Allen-Bradley 889D-F4NEDM-1 is a DC Micro (M12) cordset patchcord cable from the Bulletin 889 series. This 1-meter cable features a 4-pin straight female connector on one end and a straight male connector on the other, making it ideal for linking proximity sensors, limit switches, photoelectric sensors, and other field devices to PLC input/output modules or I/O hubs. The unshielded PVC jacket in red identifies safety-critical applications while maintaining IEC color coding standards.
Key Features
- 4-pin DC Micro (M12) connectors with straight (non-angled) orientation
- 1-meter cable length for compact field deployments
- 18 AWG conductor wire for robust signal transmission
- Unshielded PVC cable jacket; red color for safety application identification
- IEC color-coded wiring for industrial compliance
- Overmolded connectors for durability and secure seating
- Drop-in compatibility with standard 889D series devices and Allen-Bradley control systems
Technical Specifications
- Part Number: 889D-F4NEDM-1
- Connector Type: M12 DC Micro, 4-pin
- Connector A: Female, straight, internal threads
- Connector B: Male, straight, external threads
- Cable Length: 1 meter (3.28 feet)
- Wire Gauge: 18 AWG
- Cable Jacket: PVC, unshielded
- Color: Red
- IP Rating: IP69K (rated connectors)
- Housing Material: Plastic with epoxy-coated zinc connectors
- Standards: IEC color coded; RoHS compliant
Typical Applications
The 889D-F4NEDM-1 cordset is commonly used in:
- Proximity sensor wiring to discrete I/O modules (Allen-Bradley CompactLogix, ControlLogix, MicroLogix)
- Limit switch connections in motion control and safety loops
- Photoelectric sensor signal cables in packaging and material handling systems
- General-purpose sensor-to-controller connectivity in factory automation
- Retrofit and field replacements in existing 889D-based installations
Compatibility & Replacements
Compatible With
- Allen-Bradley CompactLogix and ControlLogix controllers with M12 I/O modules
- Allen-Bradley Micro800 and MicroLogix systems with DC Micro sensor inputs
- Bulletin 889 DC Micro (M12) cordset ecosystem
- Any OEM equipment with standard M12 4-pin DC Micro connectors
- Proximity sensors, limit switches, and photoelectric sensors with 4-pin M12 outputs
Replaces / Drop-In Replacement For
The 889D-F4NEDM-1 directly replaces other 1-meter, 4-pin straight female-to-male DC Micro M12 cordsets. Verify compatibility with your system integrator before ordering to ensure connector orientation and pinout match your application.
Works With
- Studio 5000 and RSLogix 5000 programming environments (I/O configuration)
- Allen-Bradley PowerFlex drives with 24 VDC sensor inputs
- EtherNet/IP and discrete I/O networks using M12 gateway modules
- Siemens PROFINET and third-party industrial Ethernet hubs with M12 ports
- Any passive M12 sensor field network (no active protocol required for this cordset)
