<h2>Overview</h2>
<p>The iFm Electronic IIT205 inductive sensor is a robust proximity sensor engineered for reliable ferromagnetic material detection in challenging industrial applications. Featuring a compact M30 x 1.5 threaded metal housing with stainless steel (316L) construction, this DC PNP sensor delivers consistent performance in wash-down and corrosive environments. The IIT205 offers a 14mm flush-mountable sensing range with gold-plated contacts and a sealed M12 connector for reliable signal transmission.</p>
<h2>Key Features</h2>
<ul>
<li><strong>Wide Operating Temperature Range:</strong> 0°C to 100°C for stable operation across diverse industrial settings</li>
<li><strong>Stainless Steel Housing (316L):</strong> Resistant to high-pressure cleaning and aggressive cleaning agents</li>
<li><strong>High Protection Rating:</strong> IP68/IP69K certification for submersion and harsh washdown applications</li>
<li><strong>Gold-Plated Contacts:</strong> Enhanced durability and low contact resistance</li>
<li><strong>LED Status Indication:</strong> Yellow LED visible at 4 × 90° orientation for easy diagnostics</li>
<li><strong>Flush Mountable Design:</strong> Can be installed flush within target surface for compact installation</li>
</ul>
<h2>Technical Specifications</h2>
<ul>
<li><strong>Sensing Range:</strong> 14 mm (flush-mountable)</li>
<li><strong>Operating Voltage:</strong> 10–36 V DC</li>
<li><strong>Output Current:</strong> 100 mA</li>
<li><strong>Electrical Design:</strong> DC PNP</li>
<li><strong>Output Function:</strong> Normally Open</li>
<li><strong>Switching Frequency:</strong> 100 Hz</li>
<li><strong>Mounting Type:</strong> M30 × 1.5 metal thread (flush and non-flush mountable)</li>
<li><strong>Length:</strong> 50 mm</li>
<li><strong>Housing Material:</strong> Stainless steel 316L (threaded sleeve); PEEK polyether ether ketone (active face)</li>
<li><strong>Connector:</strong> M12 sealed connector</li>
<li><strong>Ambient Temperature:</strong> 0°C to 100°C</li>
<li><strong>Protection Rating:</strong> IP68 / IP69K; COP</li>
<li><strong>Status Indication:</strong> Yellow LED (4 × 90°)</li>
</ul>
<h2>Typical Applications</h2>
<p>The iFm IIT205 sensor excels in demanding industrial environments where ferromagnetic target detection is critical:</p>
<ul>
<li>Wash-down and wet processing facilities (food, beverage, pharmaceutical)</li>
<li>Packaging and material handling automation</li>
<li>Manufacturing production lines with metal component detection</li>
<li>Conveyor systems and automated assembly operations</li>
<li>High-pressure cleaning and corrosive chemical environments</li>
<li>Motor and machinery shaft position sensing</li>
</ul>
<h2>Compatibility & Replacements</h2>
<h3>Compatible With</h3>
<ul>
<li>Standard PLC analog and digital input modules (10–36 V DC rated)</li>
<li>Industrial control systems with DC PNP input capability</li>
<li>M12 connector-based automation architectures</li>
<li>IP68/IP69K-rated control enclosures and washdown systems</li>
</ul>
<h3>Replaces / Drop-In Replacement For</h3>
<p>Verify compatibility with your system integrator before ordering. The IIT205 may serve as a replacement for comparable 14mm M30 DC PNP inductive sensors; consult the original equipment datasheet or contact iFm technical support for confirmation.</p>
<h3>Works With</h3>
<ul>
<li>M12 A-coded connectors and cable assemblies</li>
<li>Standard PLC and automation platforms (Rockwell, Siemens, Mitsubishi, Omron, etc.)</li>
<li>DC supply systems with voltage regulation (10–36 V)</li>
<li>Industrial Ethernet and fieldbus systems compatible with DC analog/digital I/O</li>
</ul>
