Overview
The Metal Work ISO 5599 Size 2 directional control valve is a standard-compliant pneumatic component designed for proportional distribution of compressed air in industrial automation and hydraulic systems. This ISO 5599 Size 2 valve meets international dimensional and functional specifications, providing drop-in compatibility with standard mounting interfaces. Ideal for machines requiring precise directional control of pneumatic cylinders and actuators.
Key Features
- ISO 5599-2 mounting interface with side outlets
- 5/2 directional configuration available in solenoid/spring, solenoid/solenoid, and pilot actuation variants
- Operating temperature range -10°C to +60°C
- Pressure range: vacuum to 10 bar
- Minimum actuation pressure: 2.5 bar for standard configurations
- Aluminum body and slider construction with NBR seals for durability
- Pilot operation switching time <35 ms at 5 bar
Technical Specifications
- Valve Size: ISO 5599 Size 2 (22mm)
- Configuration: 5/2 Directional Control
- Actuation Type: Solenoid or Pilot (verify specific variant)
- Operating Pressure: 0–10 bar
- Minimum Control Pressure: 2.5 bar
- Operating Temperature: -10°C to +60°C
- Body Material: Aluminum with NBR seals
- Port Configuration: Side outlets (ISO 5599-2)
- Pilot Medium: Compressed air
Typical Applications
- Pneumatic cylinder control in manufacturing automation
- Industrial robot gripper and actuator circuits
- Packaging and material handling equipment
- Automated assembly and injection molding systems
- Pneumatic test and inspection rigs
- Secondary and tertiary circuit control in larger hydraulic installations
Compatibility & Replacements
Compatible With
- ISO 5599-2 standard base plates and manifold systems
- Compressed air systems operating 0–10 bar
- 24 VDC, 230 VAC, 110 VAC solenoid coils (depends on base unit)
- Metal Work accessory bases, solenoid connectors, and VDR surge protectors
Replaces / Drop-In Replacement For
This valve meets ISO 5599 Size 2 specifications and can interface with any standard ISO 5599-2 base plate or manifold system. For specific model-to-model replacement confirmation, verify part number compatibility with the system integrator.
Works With
- ISO 5599-2 directional valve manifold systems
- Pneumatic circuit design using ISO 1219 schematic conventions
- Metal Work solenoid coils and electrical connectors
- Standard compressed air networks and filtration systems
- Industrial PLC and automation controllers via solenoid actuation
