Overview
The AutomationDirect SL9696-LVE is a SOLO single-loop temperature controller designed for precise process temperature control in industrial applications. This 1/4 DIN-sized unit accepts universal input signals (thermocouple, RTD, analog voltage, and current), providing flexible sensor integration. With 0-10VDC linear voltage output and 11-15VDC pulse output, plus two 3A SPST alarm relays, the SL9696-LVE enables both proportional and on-off control strategies. Operating on 100-240 VAC, it integrates into existing automation systems with Modbus ASCII/RTU over RS-485.
Key Features
- Universal Input Support: Accepts thermocouple, RTD, and analog inputs (0-5V, 0-10V, 0-20mA, 4-20mA, 0-50mV)
- Dual Control Outputs: 0-10 VDC linear voltage output and 11-15 VDC pulse output with two 3A SPST relays
- Multiple Control Modes: PID, ON-OFF, and manual control plus 64-segment Ramp/Soak profile
- Modbus Communications: Built-in RS-485 interface using Modbus slave (ASCII or RTU) communication protocol
- LED Display: 2 line x 4 character 7-segment LED display for Process Value (PV) in red and Set Point (SV) in green
- Event Inputs: EVENT1 input controls output disable, EVENT2 switches between dual control parameter groups
Technical Specifications
- Input Voltage: 100 to 240 VAC 50/60 Hz or 24 VDC (85 to 264 VAC or 21.6 to 26.4 VDC)
- Power Consumption: 5 VA Max
- Accuracy: Less than ±0.2% full scale (except thermocouple R, S, & B types); Max ±3° for R, S, & B types
- Memory: EEPROM 4K bit with 100,000 write cycles
- Relay Output: SPDT max resistive load 5A @ 30 VDC
- Pulse Output: 11-15 VDC pulse, 40mA maximum
- Mounting: Panel cutout mounting via included M3X0.5 brackets
- Weight: 0.355 kg
- Origin: China
Typical Applications
Suitable for temperature monitoring and control with OFF, Manual, and Ramp/Soak operation modes with up to three alarm outputs allowing seventeen alarm types. Common uses include industrial ovens, furnaces, injection molding machines, packaging equipment, and laboratory incubators where proportional or on-off temperature control is required.
Compatibility & Replacements
Compatible With
- Thermocouple sensors (J, K, E, T, N, R, S, B type)
- Platinum resistance thermometers (RTD)
- Analog signal sources (0-5V, 0-10V, 0-20mA, 4-20mA, 0-50mV)
- Standard 100-240 VAC industrial power
- 24 VDC power supplies
- Relay and pulse control circuits
Replaces / Drop-In Replacement For
Verify compatibility with your system integrator before ordering. The SL9696 series includes multiple output variants; confirm the SL9696-LVE (linear voltage + pulse) matches your control requirements.
Works With
- Modbus RS-485 networks (ASCII and RTU protocols)
- PLC and HMI systems via serial communication
- SCADA and process monitoring software supporting Modbus
- Proportional control valve and heating/cooling circuits
- AutomationDirect configuration software (free)
