Overview
The Fireye MP560 Programmer Module is a plug-in controller designed for use with Fireye Modular M-Series II flame safeguard control systems. This selectable timing module determines the operational characteristics of the burner management control, including ignition timing, purge duration, and recycle functionality. The MP560 is widely used in commercial and industrial heating and process burner applications that require reliable automatic ignition and continuous flame monitoring.
Key Features
- Selectable Purge Timing: Dipswitches allow configuration of purge timing intervals for optimal burner startup sequencing.
- Pilot Trial-for-Ignition (PTFI) Timing: Configurable pilot ignition window via dipswitches for precise flame establishment.
- 10-Second Main Flame Trial-for-Ignition (MTFI): Standard trial period for main burner flame detection and confirmation.
- Recycle/Non-Recycle Operation: Selectable via dipswitches to define control behavior on ignition failure.
- Check-Run Switch: Integrated test switch for pilot stabilization verification and flame testing during service and startup.
- LED Status Indicators: Visual indication of control operating status and lockout diagnostics.
- Plug-in Design: Easy hot-swap installation into standard Fireye M-Series II chassis without complex wiring.
Technical Specifications
- Manufacturer: Fireye
- Part Number: MP560
- Compatible Chassis: Fireye Modular M-Series II (MC120, MC120R, MC120P)
- Main Flame Trial-for-Ignition: 10 seconds
- Pilot Stabilization Period: Standard period (dipswitches configure purge timing)
- Input Voltage: 120 VAC (per Fireye standard)
- Operating Temperature Range: −40°F to +140°F (−40°C to +60°C)
- Dimensions: 5.7″ × 3.95″ × 1.65″
- Weight: 0.35 lb
- Installation Method: Plug-in module
- Dipswitches: Selectable purge timing, PTFI timing, recycle mode
Typical Applications
The Fireye MP560 is employed in commercial and industrial burner management systems including:
- Commercial heating boilers and furnaces
- Industrial process burners (gas and light oil fuels)
- Commercial kitchen equipment burners
- HVAC system burner controls
- Process heating applications requiring flame safeguard monitoring
Compatibility & Replacements
Compatible With
- Fireye Modular M-Series II Chassis (MC120, MC120R, MC120P)
- Fireye Amplifier Modules (flame failure response time determined by amplifier selection)
- Fireye UV Scanners and Flame Rod/Photocell Detectors
- Commercial burner management control systems using Fireye M-Series II platform
Replaces / Drop-In Replacement For
The Fireye MP560 is a distinct model within the Fireye M-Series II programmer module family. Other modules in this family include MP230, MP230H, MP561, and MP562. Verify your specific control configuration and requirements before ordering to ensure correct module selection. Consult Fireye technical documentation or your system integrator if replacement of an existing module is required.
Works With
- Fireye Modular M-Series II Control Platform
- Fireye Flame Sensing Systems (UV, Flame Rod, Photocell)
- Standard Fireye chassis wiring bases and connectors
- Manual reset and remote reset configurations (depending on chassis model)
- Post-purge capability (available on MC120P chassis)
