<h2>Overview</h2>
<p>The <strong>Connecticut Electric UBIF-30N</strong> is a 30-amp single pole circuit breaker engineered as a direct replacement for Federal Pacific Electric Type NA (thick) breakers. This UBI series breaker is classified and approved for use in Federal Pacific load centers and provides dependable overcurrent protection in residential and light commercial electrical systems.</p>
<h2>Key Features</h2>
<ul>
<li>30-amp, 1-pole configuration with standard trip characteristics</li>
<li>Type NA (thick) profile—direct replacement for Federal Pacific units</li>
<li>ETL listed with 10,000 AIC (Ampere Interrupting Capacity)</li>
<li>SWD (Switching Duty) rated for single pole applications</li>
<li>Plug-in mounting design for quick installation and removal</li>
<li>Operates on 120/240 VAC systems</li>
</ul>
<h2>Technical Specifications</h2>
<ul>
<li><strong>Amperage:</strong> 30 amps</li>
<li><strong>Poles:</strong> 1-pole</li>
<li><strong>Voltage Rating:</strong> 120/240 VAC</li>
<li><strong>Type:</strong> Type NA (thick) molded case</li>
<li><strong>Interrupting Capacity:</strong> 10,000 AIC</li>
<li><strong>Trip Type:</strong> Standard magnetic thermal</li>
<li><strong>Mounting:</strong> Plug-in (Stab-Lok compatible)</li>
<li><strong>Duty Rating:</strong> SWD (Switching Duty)</li>
<li><strong>Certification:</strong> ETL Listed</li>
</ul>
<h2>Typical Applications</h2>
<p>The UBIF-30N is suitable for protecting branch circuits in:</p>
<ul>
<li>Residential single-family homes with Federal Pacific panels</li>
<li>Light commercial buildings and small business electrical systems</li>
<li>Renovation and retrofit projects replacing aging Federal Pacific breakers</li>
<li>HVAC circuits, water heater circuits, and general lighting loads</li>
</ul>
<h2>Compatibility & Replacements</h2>
<h3>Compatible With</h3>
<ul>
<li>Federal Pacific Electric load centers and panelboards</li>
<li>Federal Pacific Stab-Lok busbar systems</li>
<li>Type NA (thick) breaker slots in FPE panels</li>
<li>120/240 VAC single phase systems</li>
</ul>
<h3>Replaces / Drop-In Replacement For</h3>
<ul>
<li>Federal Pacific Electric Type NA 30A single pole breakers</li>
<li>Original Federal Pacific UBIF30N units</li>
</ul>
<h3>Works With</h3>
<ul>
<li>Federal Pacific Stab-Lok panel architecture and mounting rails</li>
<li>Standard branch circuit wiring (copper or aluminum, per NEC guidelines)</li>
<li>Residential and light commercial protective grounding systems</li>
</ul>
