Overview
The UC207-23 bearing is an industry-standard insert ball bearing designed for flange-mount applications. UC207-23 is a Chrome Insert Ball Bearing with two set screws on the extended end of the inner ring used for holding onto a shaft. This model pairs with the F207 cast-iron square flange housing for stable, perpendicular mounting on machinery frames and equipment bases.
Key Features
- Premium C3 precision insert bearing housed within a high-strength solid-base cast-iron housing
- Pre-lubricated with Grease, ensuring it is ready for use upon arrival
- Self-aligning for standard load capacity and suitable for applications where the direction of rotation alternates
- Steel retainer, wide inner-ring, anti-rotation device, relubricating capabilities, and strategically placed set-screws
- Set screw locking mechanism for secure shaft retention
- Lubrication groove with hole on set screw side, additional oil hole on opposite side, anti-rotation pin on OD
Technical Specifications
- Bearing Type: Chrome Insert Ball Bearing
- Bore Diameter: 1.4375 inches (1-7/16″)
- Width Dimension: 72mm
- Ball Diameter: 20mm
- Height: 42.9mm
- Overall Flange Length: 4.606 inches
- Bolt Size: 7/16″
- Bolt Centers: 3.622″
- Mounting: Square flange with set screw locking
- Weight: Approximately 1.4 – 1.62 kg
- Lubrication: Pre-greased, relubricatable
Typical Applications
UCF207-23 bearings are commonly used in applications such as construction equipment, agricultural equipment, forestry, aggregate, conveyor systems and Agricultural Machinery, Conveying Equipment, Construction Equipment, Packaging, Production Line, Mining, Fans, Conveyor Systems, Shaft Supports, Food Processing, Car Wash, Food and Beverage Processing. The self-aligning design and robust cast-iron housing make it ideal for industrial environments where durability and low maintenance are critical.
Compatibility & Replacements
Compatible With
- F207 square flange housing (standard pairing)
- FS207 reinforced cast-iron housing
- 2-bolt and 4-bolt flange mount systems
- Standard 1-7/16″ shaft applications
- Pillow block and take-up unit assemblies
Replaces / Drop-In Replacement For
- Browning UC207-107D1, NTN SC115FF, Dodge UG223NL, SKF 123368, and equivalent UC200 series insert bearings
- GY1107KRRB and similar industry-interchange models
- UCFL207-23 and UCFT207-23 (when used with appropriate flange housings)
Works With
- Any cast-iron F207-series flange housing
- Shaft diameters: 1-7/16″ with set screw mounting
- Industrial bearing assemblies requiring self-aligning inserts
- Equipment rotating at moderate to high speeds with standard load ratings
